TEKS®

Wood to Metal Fasteners

No pre-drilling, fast efficient attachment of wood to steel.

Applications

	Plywood roof and floor sheet to steel frames.
	2 x 4 headers to steel frames.
	Plywood fascia to steel frames.
	Wood mansard to steel frames.

Product Benefits

	Point has precise cutting edges to improve drill performance with less effort.
	Special winged fasteners ream a hole in wood preventing thread engagement during drilling.
	Wafer head design has a large bearing surface ideal for plywood.
	Flat head design countersinks and seats flush in wood.
	Gray Spex™ finish provides excellent corrosion resistance and lower tapping torque.

wpe02097.gif (27867 bytes)

Product Specifications

Diameter........#10, #12, 1/4"
Thread Form.....10-16
                10-24
                12-24
                1/4-20
Head Style......#10: #2 Phillips Flat
                #10: #2 Phillips Wafer
                #12: #3 Phillips Flat
                #1/4: #3 Phillips Flat
Drill Point.....Teks 3
                Teks 4
Finish..........Gray Spex™
Flat Head        Wafer Head

Corrosion Resistance

Kesternich Results (DIN 50018, 2.0L)

15 Cycles - 5% or less red rust

Salt Spray Results (ASTM B117)

300 hours - 10% or less red rust

Part#	Description	Head Style	Drill Point	Wood Attachment Range
1077000	10-24 x 3/4"	Wafer	#3	.1/4"-3/8"
1079000	10-24 x 1"	Wafer	#3	1/4"-1/2"
1082000	10-24 x 1-7/16"	PFH w/w*	#3	1/4"-3/4"
1087000	10-16 x 1-13/16"	PFH w/r**	#3	1/4"-3/4"
1092000	12-24 x 2-1/4"	PFH w/w*	#4	3/4" - 1-3/8"
1094000	12-24 x 2-3/4"	PFH w/w*	#4	3/4" - 1-5/8"
1096000	1/4-20 x 3"	PFH w/w*	#4	3/4" - 2"

* with wings ** with ribs under head

An independent, non-profit content rating organization.

Copyright © 1998, 1999, 2000 - ITW Buildex. All trademarks or registered trademarks used are trademarks of ITW Buildex and Illinois Tool Works, Inc.