logo.gif (5484 bytes)     helmet.gif (2142 bytes)

bitw.gif (3500 bytes)

TEKS®archmetal.gif (30555 bytes)

Low Profile Architectural Metal Roof Clip Fasteners new4a.gif (2109 bytes)

Incorporates the ITW exclusive Phillips Square-Driv® anti-cam-out system.

Applications
Low profile architectural metal roof clips to steel purlin.
Low profile architectural metal roof clips to wood supports.

Product Features
#12 diameter utilizes the ITW exclusive Phillips Square-Driv® with patented interlocking components system.
Excellent installation stability.
Extended bit driver life.
Keeps the driver securely mated to the fastener during installation
Hands-free installation
Low profile pancake head style ensures proper installation of metal roof panels.
#10 Diameter uses the coated Phillips drive system providing improved driver bit-to-fastener stability and friction fit.
#10 has above industry average tensile strength
Both fasteners are finished with a corrosion resistant coating.  Teks 3 fasteners are available with Gray Spex™ coating; Type A fasteners with Climacoat®
Sharp convex drill point has precise cutting edges to improve drill performance with less effort.

wpe89247.gif (24748 bytes)

Product Specifications

 
Diameter.....#10, #12
Thread Form..10-16 (Teks 3)
             10-12 (Type A)
             12-14 (Teks 3)
             12-11 (Type A)
Head Style...#10/#2 Phillips Pancake
             #12/#2 Phillips Square-Driv Pancake
Drill Point..Teks 3
             Type A
Finish.......Gray Spex (Teks 3)
             Climacoat® (Type A)

Corrosion Resistance

Climacoat®
Kesternich Results (DIN 50018, 2.0L)
20 Cycles - 10% or less red rust
Salt Spray Results (ASTM B117)
500 hours - 10% or less red rust

Gray Spex
Kesternich Results (DIN 50018, 2.0L)
15 Cycles - 5% or less red rust
Salt Spray Results (ASTM B117)
300 hours - 10% or less red rust

Part# Description Head Style Drill Point Max Material Attachment
1560553 10-16 x 1" #2 Phillips Pancake #3 .600
1575553 12-14 x 1" #2 PSD Pancake #3 .600
1588910 #2 PSD Bit      
1596553 10-12 x 1" #2 Phillips Pancake Type A .250
1640553 10-12 x 1-1/2" #2 Phillips Pancake Type A .750
1597553 12-11 x 1" #2 PSD Pancake Type A .250

 


rsaclabel.gif (1167 bytes) An independent, non-profit content rating organization.

Copyright © 1998, 1999, 2000 - ITW Buildex. All trademarks or registered trademarks used are trademarks of ITW Buildex and Illinois Tool Works, Inc.

Send mail to: mailto:kehnisz@calweb.com MAIP with questions or comments about this webpage.