Epoxy Adhesive used to embed all grades of threaded rod, reinforcing rod, and other inserts as identified in the plans or other notations. Specified for anchorage into hardened concrete and solid masonry.

Epoxy Adhesive:

1. Two component, 100% solids (containing no solvents), non-sag paste, insensitive to moisture, tan in color.
2. Meets ASTM C881-90, Type II, Grade 3, Classes A, B, and C with the exception of bond strength.
3. Shrinkage during cure per ASTM D2566: .00004 in./in.
4. Compressive strength, ASTM D695: 9,170 psi minimum.
5. Shelf life: 2 years minimum.
6. Water solubility: None.

Packaging:

1. Disposable, self-contained cartridge system capable of dispensing both epoxy components in the proper mixing ratio.
2. Epoxy components dispensed through a static mixing nozzle that thoroughly mixes the material and places the epoxy at the base of the pre-drilled hole.
3. Cartridge markings: Include manufacturer’s name, batch number and dating, mix ratio by volume, ANSI hazard classification, and appropriate ANSI handling precautions.

Manufacturer’s Services:
Conduct job-site training of Contractor’s personnel for safe and proper installation, handling, and storage of the Epoxy System. Schedule training and notify the Engineer of the time and place of the sessions.

Products:
Epcon System, Granite 5 Epoxy as manufactured by
ITW Ramset/Red Head
Wood Dale, Illinois
630/350-0370