Epoxy Adhesive used to embed all grades of threaded rod, reinforcing rod, and other inserts as identified in the plans or other notations. Specified for anchorage into hardened concrete, solid masonry, and hollow masonry.

Epoxy Adhesive:

1. Two component, 100% solids (containing no solvents), non-sag paste, insensitive to moisture, gray in color.
2. Meets NSF Standard 61 for use in conjunction with drinking water systems.
3. Meets ASTM C881-90, Type IV, Grade 3, Class A, B, and C with the exception of gel time.
4. Shrinkage during cure per ASTM D2566: .00051 in./in. maximum.
5. Compressive strength, ASTM D695: 10,300 psi minimum.
6. Shelf life: 3 years minimum.
7. Water solubility: None.
8. Heat deflection temperature, ASTM D648: 140 degrees F minimum.

Packaging:

1. Disposable, self-contained cartridge system capable of dispensing both epoxy components in the proper mixing ratio.
2. Epoxy components dispensed through a static mixing nozzle that thoroughly mixes the material, and places the epoxy at the base of the pre-drilled hole.
3. Cartridge markings: Include manufacturer’s name, batch number and dating, mix ratio by volume, ANSI hazard classification, and appropriate ANSI handling precautions.
4. Each cartridge supplied with a chart indicating the color of the material when the correct mixing ratio is achieved.

Manufacturer’s Services:
Conduct job-site training of Contractor’s personnel for safe and proper installation, handling, and storage of the Epoxy System. Schedule training and notify the Engineer of the time and place of the sessions.

Products:
Epcon System, Ceramic 6 Epoxy as manufactured by
ITW Ramset/Red Head
Wood Dale, Illinois
630/350-0370